TS2000 Barcode¶

The values are padded out with zeros in front of the value to make up the full number of characters.

The barcode is built like this: 1200+000+0022+6351+089+128574+078+01
So the Barcode is stored like this: 120000000022635108912857407801

Works Order – Label Blind Size 2.1

In order to print the barcodes for vertical, please make sure that the Techno TS2000 barcode required flag is switched on in the parameters.

It includes the TS2000 barcode for verticals.
These printed on the second label down on the right-hand side.

The Techno barcode is picking up the correct information from Blindata.

The fields are as follows:

Maximum length –
Minimum length – always 0000
Number of louvres – number of vanes
Material – uses code from Stock Control > Characteristics > Techno Material Code

The 'Techno Material Code' value can be imported via the 'Import From Excel > Stock Update' routine.
Louvre’s width – set to 089
Order – order_id from Blindata
Position – set to 001, 002, 003 etc for each blind in the order
Type of work – always 01.

At the moment the TS2000 barcode is displayed on the following reports only in Blindata:

Label Print - 3 1/2 x 1 - Standard
Label Print - 3 1/2 x 1 - Bespoke 59
Label Print - 5x1 Barcode
Label Print – 200x24mm
Works Order - Label Blind Size 2.1
Works Order - Label 7
Works Order - Bespoke 17a